|

楼主 |
发表于 2008-2-23 09:30:00
|
显示全部楼层
补加破解安装说明
PTC Pro/ENGINEER Wildfire 4.0 F000
===================================
1> 打开文件 license.dat,将文件中显示为"00-00-00-00-00-00" 的字符串用你机器的网卡物理地址(with your PTC_HOST_ID(Your netcard physical address))替换,然后存盘。
2> 安装wildfire4.0 F000 ,采用锁定安装,使用前面修改的license.dat。
2.运行补丁!
将补丁文件 proe-patch.exe 拷贝到安装目录,如d:\proeWildfire 4.0\i486_nt\obj ,然后运行补丁文件proe-patch.exe。
将补丁文件 prom-patch1.exe 拷贝到安装目录,如D:\proeWildfire 4.0\mech\i486_nt\bin ,然后运行补丁文件prom-patch1.exe.
将补丁文件 prom-patch2.exe 拷贝到安装目录 如D:\proeWildfire 4.0\mech\i486_nt\ptc ,然后运行补丁文件prom-patch2.exe,点击CRACK
3.如果你要安装 PTC Distributed Services,请电击PTC.Setup: other product->PTC Distributed Services, 使用前面修改的 license.dat进行安装,然后
将补丁文件 prods-patch.exe 拷贝到安装目录 如D:\ptc_distributed_services\i486_nt\obj ,然后运行补丁文prods-patch.exe.
---------------------------------------
至此,安装全部结束。
20080223 |
|