图文并茂，很好。
注射成形故障包括下述各种类型：本节将故障分为【外观】故障和【成型性】故障两大类，并总结了各自的原因和对策。大部分成型故障都有多种原因，其中的多数情况必须在综合考虑成型品的实际形状、成型条件或设备状态后才能作出判断。为此，我们在本节中尽可能列举具体的例子来说明。请客户根据情况参阅与自己的现象最接近的那部分内容。如果本页能够对客户排除故障有所帮助的话，那就太好了。This corner introduce cause and countermeasure against many molding failure. They are classified into about appearance and moldability. Molding failure has usually no one causes. Total judgment is required to take countermeasure. So then, this corner shows specific example as possible. You choioce contents which you think it is most near your trouble. We hope this page help you. |
|小黑屋|手机版|模具论坛
( 浙ICP备15037217号 )
发表于 2008-12-27 19:40:35
/5 
