proe3.0中如何恢复purge命令，清除旧的版本！

ytxmold

在proe3.0操作界面打开window中open system window，
弹出DOS界面输入purge,系统提示不是有效命令，在此请教大家的指点，不胜感激！
bordf0230110fhhmx

无中生有01

没遇到这种情况，可能是这个命令文件坏了，方法是修复安装一遍，另一种可能是系统到不到这个命令的位置，要分析是什么原因出现这种状况的，再找解决办法。

charmy0508

自己在bin目录下看看有没有purge.dat文件阿
复制此文件到工作目录运行看看能不能用

如果没有 建一个文本文档添加以下内容后 改名为purge.dat  试试看
@echo off

set MC=unset
if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt
if "%PROCESSOR_ARCHITECTURE%" == "AMD64" set MC=x86e_win64
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=INTEL_486     - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_64      - For Windows Intel Itanium based machines.
echo.
echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines.
echo.
exit
:mc_done

set PRO_MACHINE_TYPE=%MC%

if "%PROOBJ_START_DIRECTORY%" == "" set PRO_DIRECTORY=
if NOT "%PRO_DIRECTORY%" == "" "%PRO_DIRECTORY%\bin\%MC%_ptc_setvars" %0 "purge" bat
if "%PRO_DIRECTORY%" == "" %MC%_ptc_setvars %0 "purge" bat
call ptc_setvars.bat
del  ptc_setvars.bat

set start_cmd=start ""

set PRO_DIRECTORY=%PRODIR%
if NOT "%PTCPATH%" == "" goto ptcpathset

set path=%PRO_DIRECTORY%\bin;%path%

set PTCPATH=true
:ptcpathset


"%PRODIR%\%MC%\obj\purge.exe" %1 %2 %3 %4 %5
:ptc_end
exit /B %ERRORLEVEL%




如果还是不行  那就修复安装了

注：以上dat文件的内容 版本4.0 m080
应该是通用的罢